// scheduleOne does the entire scheduling workflow for a single pod.  It is serialized on the scheduling algorithm's host fitting.
func (sched *Scheduler) scheduleOne() {
	...
	suggestedHost, err := sched.schedule(pod)
	if err != nil {
		// schedule() may have failed because the pod would not fit on any host, so we try to
		// preempt, with the expectation that the next time the pod is tried for scheduling it
		// will fit due to the preemption. It is also possible that a different pod will schedule
		// into the resources that were preempted, but this is harmless.
		if fitError, ok := err.(*core.FitError); ok {
			preemptionStartTime := time.Now()
      // 执行抢占逻辑
			sched.preempt(pod, fitError)
			metrics.PreemptionAttempts.Inc()
			metrics.SchedulingAlgorithmPremptionEvaluationDuration.Observe(metrics.SinceInMicroseconds(preemptionStartTime))
			metrics.SchedulingLatency.WithLabelValues(metrics.PreemptionEvaluation).Observe(metrics.SinceInSeconds(preemptionStartTime))
		}
		return
	}
  ...
}  

// 基于sched.schedule(pod)返回的err和当前待调度的pod执行抢占策略
sched.preempt(pod, fitError)

// preempt tries to create room for a pod that has failed to schedule, by preempting lower priority pods if possible.
// If it succeeds, it adds the name of the node where preemption has happened to the pod annotations.
// It returns the node name and an error if any.
func (sched *Scheduler) preempt(preemptor *v1.Pod, scheduleErr error) (string, error) {
	if !util.PodPriorityEnabled() || sched.config.DisablePreemption {
		glog.V(3).Infof("Pod priority feature is not enabled or preemption is disabled by scheduler configuration." +
			" No preemption is performed.")
		return "", nil
	}
	preemptor, err := sched.config.PodPreemptor.GetUpdatedPod(preemptor)
	if err != nil {
		glog.Errorf("Error getting the updated preemptor pod object: %v", err)
		return "", err
	}

	node, victims, nominatedPodsToClear, err := sched.config.Algorithm.Preempt(preemptor, sched.config.NodeLister, scheduleErr)
	metrics.PreemptionVictims.Set(float64(len(victims)))
	if err != nil {
		glog.Errorf("Error preempting victims to make room for %v/%v.", preemptor.Namespace, preemptor.Name)
		return "", err
	}
	var nodeName = ""
	if node != nil {
		nodeName = node.Name
		err = sched.config.PodPreemptor.SetNominatedNodeName(preemptor, nodeName)
		if err != nil {
			glog.Errorf("Error in preemption process. Cannot update pod %v/%v annotations: %v", preemptor.Namespace, preemptor.Name, err)
			return "", err
		}
		for _, victim := range victims {
			if err := sched.config.PodPreemptor.DeletePod(victim); err != nil {
				glog.Errorf("Error preempting pod %v/%v: %v", victim.Namespace, victim.Name, err)
				return "", err
			}
			sched.config.Recorder.Eventf(victim, v1.EventTypeNormal, "Preempted", "by %v/%v on node %v", preemptor.Namespace, preemptor.Name, nodeName)
		}
	}
	// Clearing nominated pods should happen outside of "if node != nil". Node could
	// be nil when a pod with nominated node name is eligible to preempt again,
	// but preemption logic does not find any node for it. In that case Preempt()
	// function of generic_scheduler.go returns the pod itself for removal of the annotation.
	for _, p := range nominatedPodsToClear {
		rErr := sched.config.PodPreemptor.RemoveNominatedNodeName(p)
		if rErr != nil {
			glog.Errorf("Cannot remove nominated node annotation of pod: %v", rErr)
			// We do not return as this error is not critical.
		}
	}
	return nodeName, err
}

if !util.PodPriorityEnabled() || sched.config.DisablePreemption {
	glog.V(3).Infof("Pod priority feature is not enabled or preemption is disabled by scheduler configuration." +
		" No preemption is performed.")
	return "", nil
}

preemptor, err := sched.config.PodPreemptor.GetUpdatedPod(preemptor)
if err != nil {
	glog.Errorf("Error getting the updated preemptor pod object: %v", err)
	return "", err
}

func (p *podPreemptor) GetUpdatedPod(pod *v1.Pod) (*v1.Pod, error) {
	return p.Client.CoreV1().Pods(pod.Namespace).Get(pod.Name, metav1.GetOptions{})
}

node, victims, nominatedPodsToClear, err := sched.config.Algorithm.Preempt(preemptor, sched.config.NodeLister, scheduleErr)

err = sched.config.PodPreemptor.SetNominatedNodeName(preemptor, nodeName)

func (p *podPreemptor) SetNominatedNodeName(pod *v1.Pod, nominatedNodeName string) error {
	podCopy := pod.DeepCopy()
	podCopy.Status.NominatedNodeName = nominatedNodeName
	_, err := p.Client.CoreV1().Pods(pod.Namespace).UpdateStatus(podCopy)
	return err
}

err := sched.config.PodPreemptor.DeletePod(victim)

func (p *podPreemptor) DeletePod(pod *v1.Pod) error {
	return p.Client.CoreV1().Pods(pod.Namespace).Delete(pod.Name, &metav1.DeleteOptions{})
}

// Clearing nominated pods should happen outside of "if node != nil". Node could
// be nil when a pod with nominated node name is eligible to preempt again,
// but preemption logic does not find any node for it. In that case Preempt()
// function of generic_scheduler.go returns the pod itself for removal of the annotation.
for _, p := range nominatedPodsToClear {
	rErr := sched.config.PodPreemptor.RemoveNominatedNodeName(p)
	if rErr != nil {
		glog.Errorf("Cannot remove nominated node annotation of pod: %v", rErr)
		// We do not return as this error is not critical.
	}
}

func (p *podPreemptor) RemoveNominatedNodeName(pod *v1.Pod) error {
	if len(pod.Status.NominatedNodeName) == 0 {
		return nil
	}
	return p.SetNominatedNodeName(pod, "")
}

func NewConfigFactory(args *ConfigFactoryArgs) scheduler.Configurator {
  ...
  	// unscheduled pod queue
	args.PodInformer.Informer().AddEventHandler(
			...
			Handler: cache.ResourceEventHandlerFuncs{
				AddFunc:    c.addPodToSchedulingQueue,
				UpdateFunc: c.updatePodInSchedulingQueue,
				DeleteFunc: c.deletePodFromSchedulingQueue,
			},
		},
	)
  ...
}  

func (c *configFactory) addPodToSchedulingQueue(obj interface{}) {
	if err := c.podQueue.Add(obj.(*v1.Pod)); err != nil {
		runtime.HandleError(fmt.Errorf("unable to queue %T: %v", obj, err))
	}
}

// Add adds a pod to the active queue. It should be called only when a new pod
// is added so there is no chance the pod is already in either queue.
func (p *PriorityQueue) Add(pod *v1.Pod) error {
	p.lock.Lock()
	defer p.lock.Unlock()
	err := p.activeQ.Add(pod)
	if err != nil {
		glog.Errorf("Error adding pod %v/%v to the scheduling queue: %v", pod.Namespace, pod.Name, err)
	} else {
		if p.unschedulableQ.get(pod) != nil {
			glog.Errorf("Error: pod %v/%v is already in the unschedulable queue.", pod.Namespace, pod.Name)
			p.deleteNominatedPodIfExists(pod)
			p.unschedulableQ.delete(pod)
		}
		p.addNominatedPodIfNeeded(pod)
		p.cond.Broadcast()
	}
	return err
}

// addNominatedPodIfNeeded adds a pod to nominatedPods if it has a NominatedNodeName and it does not
// already exist in the map. Adding an existing pod is not going to update the pod.
func (p *PriorityQueue) addNominatedPodIfNeeded(pod *v1.Pod) {
	nnn := NominatedNodeName(pod)
	if len(nnn) > 0 {
		for _, np := range p.nominatedPods[nnn] {
			if np.UID == pod.UID {
				glog.Errorf("Pod %v/%v already exists in the nominated map!", pod.Namespace, pod.Name)
				return
			}
		}
		p.nominatedPods[nnn] = append(p.nominatedPods[nnn], pod)
	}
}

// NominatedNodeName returns nominated node name of a Pod.
func NominatedNodeName(pod *v1.Pod) string {
	return pod.Status.NominatedNodeName
}

// ScheduleAlgorithm is an interface implemented by things that know how to schedule pods
// onto machines.
type ScheduleAlgorithm interface {
	Schedule(*v1.Pod, NodeLister) (selectedMachine string, err error)
	// Preempt receives scheduling errors for a pod and tries to create room for
	// the pod by preempting lower priority pods if possible.
	// It returns the node where preemption happened, a list of preempted pods, a
	// list of pods whose nominated node name should be removed, and error if any.
	Preempt(*v1.Pod, NodeLister, error) (selectedNode *v1.Node, preemptedPods []*v1.Pod, cleanupNominatedPods []*v1.Pod, err error)
	// Predicates() returns a pointer to a map of predicate functions. This is
	// exposed for testing.
	Predicates() map[string]FitPredicate
	// Prioritizers returns a slice of priority config. This is exposed for
	// testing.
	Prioritizers() []PriorityConfig
}

// preempt finds nodes with pods that can be preempted to make room for "pod" to
// schedule. It chooses one of the nodes and preempts the pods on the node and
// returns 1) the node, 2) the list of preempted pods if such a node is found,
// 3) A list of pods whose nominated node name should be cleared, and 4) any
// possible error.
func (g *genericScheduler) Preempt(pod *v1.Pod, nodeLister algorithm.NodeLister, scheduleErr error) (*v1.Node, []*v1.Pod, []*v1.Pod, error) {
	// Scheduler may return various types of errors. Consider preemption only if
	// the error is of type FitError.
	fitError, ok := scheduleErr.(*FitError)
	if !ok || fitError == nil {
		return nil, nil, nil, nil
	}
	err := g.cache.UpdateNodeNameToInfoMap(g.cachedNodeInfoMap)
	if err != nil {
		return nil, nil, nil, err
	}
	if !podEligibleToPreemptOthers(pod, g.cachedNodeInfoMap) {
		glog.V(5).Infof("Pod %v/%v is not eligible for more preemption.", pod.Namespace, pod.Name)
		return nil, nil, nil, nil
	}
	allNodes, err := nodeLister.List()
	if err != nil {
		return nil, nil, nil, err
	}
	if len(allNodes) == 0 {
		return nil, nil, nil, ErrNoNodesAvailable
	}
	potentialNodes := nodesWherePreemptionMightHelp(allNodes, fitError.FailedPredicates)
	if len(potentialNodes) == 0 {
		glog.V(3).Infof("Preemption will not help schedule pod %v/%v on any node.", pod.Namespace, pod.Name)
		// In this case, we should clean-up any existing nominated node name of the pod.
		return nil, nil, []*v1.Pod{pod}, nil
	}
	pdbs, err := g.cache.ListPDBs(labels.Everything())
	if err != nil {
		return nil, nil, nil, err
	}
  // 找出可能被抢占的节点
	nodeToVictims, err := selectNodesForPreemption(pod, g.cachedNodeInfoMap, potentialNodes, g.predicates,
		g.predicateMetaProducer, g.schedulingQueue, pdbs)
	if err != nil {
		return nil, nil, nil, err
	}

	// We will only check nodeToVictims with extenders that support preemption.
	// Extenders which do not support preemption may later prevent preemptor from being scheduled on the nominated
	// node. In that case, scheduler will find a different host for the preemptor in subsequent scheduling cycles.
	nodeToVictims, err = g.processPreemptionWithExtenders(pod, nodeToVictims)
	if err != nil {
		return nil, nil, nil, err
	}
	// 选出最终被抢占的节点
	candidateNode := pickOneNodeForPreemption(nodeToVictims)
	if candidateNode == nil {
		return nil, nil, nil, err
	}

	// Lower priority pods nominated to run on this node, may no longer fit on
	// this node. So, we should remove their nomination. Removing their
	// nomination updates these pods and moves them to the active queue. It
	// lets scheduler find another place for them.
  // 找出被强占节点上牺牲者pod列表
	nominatedPods := g.getLowerPriorityNominatedPods(pod, candidateNode.Name)
	if nodeInfo, ok := g.cachedNodeInfoMap[candidateNode.Name]; ok {
		return nodeInfo.Node(), nodeToVictims[candidateNode].Pods, nominatedPods, err
	}

	return nil, nil, nil, fmt.Errorf(
		"preemption failed: the target node %s has been deleted from scheduler cache",
		candidateNode.Name)
}

nodeToVictims, err := selectNodesForPreemption(pod, g.cachedNodeInfoMap, potentialNodes, g.predicates,g.predicateMetaProducer, g.schedulingQueue, pdbs)

// selectNodesForPreemption finds all the nodes with possible victims for
// preemption in parallel.
func selectNodesForPreemption(pod *v1.Pod,
	nodeNameToInfo map[string]*schedulercache.NodeInfo,
	potentialNodes []*v1.Node,
	predicates map[string]algorithm.FitPredicate,
	metadataProducer algorithm.PredicateMetadataProducer,
	queue SchedulingQueue,
	pdbs []*policy.PodDisruptionBudget,
) (map[*v1.Node]*schedulerapi.Victims, error) {

	nodeToVictims := map[*v1.Node]*schedulerapi.Victims{}
	var resultLock sync.Mutex

	// We can use the same metadata producer for all nodes.
	meta := metadataProducer(pod, nodeNameToInfo)
	checkNode := func(i int) {
		nodeName := potentialNodes[i].Name
		var metaCopy algorithm.PredicateMetadata
		if meta != nil {
			metaCopy = meta.ShallowCopy()
		}
		pods, numPDBViolations, fits := selectVictimsOnNode(pod, metaCopy, nodeNameToInfo[nodeName], predicates, queue, pdbs)
		if fits {
			resultLock.Lock()
			victims := schedulerapi.Victims{
				Pods:             pods,
				NumPDBViolations: numPDBViolations,
			}
			nodeToVictims[potentialNodes[i]] = &victims
			resultLock.Unlock()
		}
	}
	workqueue.Parallelize(16, len(potentialNodes), checkNode)
	return nodeToVictims, nil
}

// selectVictimsOnNode finds minimum set of pods on the given node that should
// be preempted in order to make enough room for "pod" to be scheduled. The
// minimum set selected is subject to the constraint that a higher-priority pod
// is never preempted when a lower-priority pod could be (higher/lower relative
// to one another, not relative to the preemptor "pod").
// The algorithm first checks if the pod can be scheduled on the node when all the
// lower priority pods are gone. If so, it sorts all the lower priority pods by
// their priority and then puts them into two groups of those whose PodDisruptionBudget
// will be violated if preempted and other non-violating pods. Both groups are
// sorted by priority. It first tries to reprieve as many PDB violating pods as
// possible and then does them same for non-PDB-violating pods while checking
// that the "pod" can still fit on the node.
// NOTE: This function assumes that it is never called if "pod" cannot be scheduled
// due to pod affinity, node affinity, or node anti-affinity reasons. None of
// these predicates can be satisfied by removing more pods from the node.
func selectVictimsOnNode(
	pod *v1.Pod,
	meta algorithm.PredicateMetadata,
	nodeInfo *schedulercache.NodeInfo,
	fitPredicates map[string]algorithm.FitPredicate,
	queue SchedulingQueue,
	pdbs []*policy.PodDisruptionBudget,
) ([]*v1.Pod, int, bool) {
	potentialVictims := util.SortableList{CompFunc: util.HigherPriorityPod}
	nodeInfoCopy := nodeInfo.Clone()

	removePod := func(rp *v1.Pod) {
		nodeInfoCopy.RemovePod(rp)
		if meta != nil {
			meta.RemovePod(rp)
		}
	}
	addPod := func(ap *v1.Pod) {
		nodeInfoCopy.AddPod(ap)
		if meta != nil {
			meta.AddPod(ap, nodeInfoCopy)
		}
	}
	// As the first step, remove all the lower priority pods from the node and
	// check if the given pod can be scheduled.
	podPriority := util.GetPodPriority(pod)
	for _, p := range nodeInfoCopy.Pods() {
		if util.GetPodPriority(p) < podPriority {
			potentialVictims.Items = append(potentialVictims.Items, p)
			removePod(p)
		}
	}
	potentialVictims.Sort()
	// If the new pod does not fit after removing all the lower priority pods,
	// we are almost done and this node is not suitable for preemption. The only condition
	// that we should check is if the "pod" is failing to schedule due to pod affinity
	// failure.
	// TODO(bsalamat): Consider checking affinity to lower priority pods if feasible with reasonable performance.
	if fits, _, err := podFitsOnNode(pod, meta, nodeInfoCopy, fitPredicates, nil, nil, queue, false, nil); !fits {
		if err != nil {
			glog.Warningf("Encountered error while selecting victims on node %v: %v", nodeInfo.Node().Name, err)
		}
		return nil, 0, false
	}
	var victims []*v1.Pod
	numViolatingVictim := 0
	// Try to reprieve as many pods as possible. We first try to reprieve the PDB
	// violating victims and then other non-violating ones. In both cases, we start
	// from the highest priority victims.
	violatingVictims, nonViolatingVictims := filterPodsWithPDBViolation(potentialVictims.Items, pdbs)
	reprievePod := func(p *v1.Pod) bool {
		addPod(p)
		fits, _, _ := podFitsOnNode(pod, meta, nodeInfoCopy, fitPredicates, nil, nil, queue, false, nil)
		if !fits {
			removePod(p)
			victims = append(victims, p)
			glog.V(5).Infof("Pod %v is a potential preemption victim on node %v.", p.Name, nodeInfo.Node().Name)
		}
		return fits
	}
	for _, p := range violatingVictims {
		if !reprievePod(p) {
			numViolatingVictim++
		}
	}
	// Now we try to reprieve non-violating victims.
	for _, p := range nonViolatingVictims {
		reprievePod(p)
	}
	return victims, numViolatingVictim, true
}

// We will only check nodeToVictims with extenders that support preemption.
// Extenders which do not support preemption may later prevent preemptor from being scheduled on the nominated
// node. In that case, scheduler will find a different host for the preemptor in subsequent scheduling cycles.
nodeToVictims, err = g.processPreemptionWithExtenders(pod, nodeToVictims)
if err != nil {
	return nil, nil, nil, err
}

// processPreemptionWithExtenders processes preemption with extenders
func (g *genericScheduler) processPreemptionWithExtenders(
	pod *v1.Pod,
	nodeToVictims map[*v1.Node]*schedulerapi.Victims,
) (map[*v1.Node]*schedulerapi.Victims, error) {
	if len(nodeToVictims) > 0 {
		for _, extender := range g.extenders {
			if extender.SupportsPreemption() && extender.IsInterested(pod) {
				newNodeToVictims, err := extender.ProcessPreemption(
					pod,
					nodeToVictims,
					g.cachedNodeInfoMap,
				)
				if err != nil {
					if extender.IsIgnorable() {
						glog.Warningf("Skipping extender %v as it returned error %v and has ignorable flag set",
							extender, err)
						continue
					}
					return nil, err
				}

				// Replace nodeToVictims with new result after preemption. So the
				// rest of extenders can continue use it as parameter.
				nodeToVictims = newNodeToVictims

				// If node list becomes empty, no preemption can happen regardless of other extenders.
				if len(nodeToVictims) == 0 {
					break
				}
			}
		}
	}

	return nodeToVictims, nil
}

candidateNode := pickOneNodeForPreemption(nodeToVictims)
if candidateNode == nil {
	return nil, nil, nil, err
}

// pickOneNodeForPreemption chooses one node among the given nodes. It assumes
// pods in each map entry are ordered by decreasing priority.
// It picks a node based on the following criteria:
// 1. A node with minimum number of PDB violations.
// 2. A node with minimum highest priority victim is picked.
// 3. Ties are broken by sum of priorities of all victims.
// 4. If there are still ties, node with the minimum number of victims is picked.
// 5. If there are still ties, the first such node is picked (sort of randomly).
// The 'minNodes1' and 'minNodes2' are being reused here to save the memory
// allocation and garbage collection time.
func pickOneNodeForPreemption(nodesToVictims map[*v1.Node]*schedulerapi.Victims) *v1.Node {
	if len(nodesToVictims) == 0 {
		return nil
	}
	minNumPDBViolatingPods := math.MaxInt32
	var minNodes1 []*v1.Node
	lenNodes1 := 0
	for node, victims := range nodesToVictims {
		if len(victims.Pods) == 0 {
			// We found a node that doesn't need any preemption. Return it!
			// This should happen rarely when one or more pods are terminated between
			// the time that scheduler tries to schedule the pod and the time that
			// preemption logic tries to find nodes for preemption.
			return node
		}
		numPDBViolatingPods := victims.NumPDBViolations
		if numPDBViolatingPods < minNumPDBViolatingPods {
			minNumPDBViolatingPods = numPDBViolatingPods
			minNodes1 = nil
			lenNodes1 = 0
		}
		if numPDBViolatingPods == minNumPDBViolatingPods {
			minNodes1 = append(minNodes1, node)
			lenNodes1++
		}
	}
	if lenNodes1 == 1 {
		return minNodes1[0]
	}

	// There are more than one node with minimum number PDB violating pods. Find
	// the one with minimum highest priority victim.
	minHighestPriority := int32(math.MaxInt32)
	var minNodes2 = make([]*v1.Node, lenNodes1)
	lenNodes2 := 0
	for i := 0; i < lenNodes1; i++ {
		node := minNodes1[i]
		victims := nodesToVictims[node]
		// highestPodPriority is the highest priority among the victims on this node.
		highestPodPriority := util.GetPodPriority(victims.Pods[0])
		if highestPodPriority < minHighestPriority {
			minHighestPriority = highestPodPriority
			lenNodes2 = 0
		}
		if highestPodPriority == minHighestPriority {
			minNodes2[lenNodes2] = node
			lenNodes2++
		}
	}
	if lenNodes2 == 1 {
		return minNodes2[0]
	}

	// There are a few nodes with minimum highest priority victim. Find the
	// smallest sum of priorities.
	minSumPriorities := int64(math.MaxInt64)
	lenNodes1 = 0
	for i := 0; i < lenNodes2; i++ {
		var sumPriorities int64
		node := minNodes2[i]
		for _, pod := range nodesToVictims[node].Pods {
			// We add MaxInt32+1 to all priorities to make all of them >= 0. This is
			// needed so that a node with a few pods with negative priority is not
			// picked over a node with a smaller number of pods with the same negative
			// priority (and similar scenarios).
			sumPriorities += int64(util.GetPodPriority(pod)) + int64(math.MaxInt32+1)
		}
		if sumPriorities < minSumPriorities {
			minSumPriorities = sumPriorities
			lenNodes1 = 0
		}
		if sumPriorities == minSumPriorities {
			minNodes1[lenNodes1] = node
			lenNodes1++
		}
	}
	if lenNodes1 == 1 {
		return minNodes1[0]
	}

	// There are a few nodes with minimum highest priority victim and sum of priorities.
	// Find one with the minimum number of pods.
	minNumPods := math.MaxInt32
	lenNodes2 = 0
	for i := 0; i < lenNodes1; i++ {
		node := minNodes1[i]
		numPods := len(nodesToVictims[node].Pods)
		if numPods < minNumPods {
			minNumPods = numPods
			lenNodes2 = 0
		}
		if numPods == minNumPods {
			minNodes2[lenNodes2] = node
			lenNodes2++
		}
	}
	// At this point, even if there are more than one node with the same score,
	// return the first one.
	if lenNodes2 > 0 {
		return minNodes2[0]
	}
	glog.Errorf("Error in logic of node scoring for preemption. We should never reach here!")
	return nil
}

// Lower priority pods nominated to run on this node, may no longer fit on
// this node. So, we should remove their nomination. Removing their
// nomination updates these pods and moves them to the active queue. It
// lets scheduler find another place for them.
nominatedPods := g.getLowerPriorityNominatedPods(pod, candidateNode.Name)
if nodeInfo, ok := g.cachedNodeInfoMap[candidateNode.Name]; ok {
	return nodeInfo.Node(), nodeToVictims[candidateNode].Pods, nominatedPods, err
}

// getLowerPriorityNominatedPods returns pods whose priority is smaller than the
// priority of the given "pod" and are nominated to run on the given node.
// Note: We could possibly check if the nominated lower priority pods still fit
// and return those that no longer fit, but that would require lots of
// manipulation of NodeInfo and PredicateMeta per nominated pod. It may not be
// worth the complexity, especially because we generally expect to have a very
// small number of nominated pods per node.
func (g *genericScheduler) getLowerPriorityNominatedPods(pod *v1.Pod, nodeName string) []*v1.Pod {
	pods := g.schedulingQueue.WaitingPodsForNode(nodeName)

	if len(pods) == 0 {
		return nil
	}

	var lowerPriorityPods []*v1.Pod
	podPriority := util.GetPodPriority(pod)
	for _, p := range pods {
		if util.GetPodPriority(p) < podPriority {
			lowerPriorityPods = append(lowerPriorityPods, p)
		}
	}
	return lowerPriorityPods
}